EV towing requires more planning than a conventional tow because the vehicle’s electric drivetrain, high-voltage system, battery position, and manufacturer transport rules can affect the safest recovery method. This checklist explains what to tell roadside assistance, when to request a flatbed, how to handle a depleted battery or flat tire, and what to verify before the vehicle is moved.
Overview
When an electric vehicle will not move, first determine whether the problem is a depleted traction battery, a separate 12-volt battery issue, a damaged tire, collision damage, an electronic fault, or a vehicle that is stuck. These situations may look similar from the driver’s seat but can require different equipment and procedures.
Before calling for electric car roadside assistance, move yourself and passengers to a safe location if possible. On a highway or shoulder, use hazard lights when they work, stay away from moving traffic, and follow local emergency guidance. If there is smoke, fire, unusual heat, leaking fluid, a strong chemical smell, visible battery damage, or a collision involving the underbody, treat the situation as an emergency. Do not touch damaged high-voltage components or attempt an improvised repair.
Have the owner’s manual or manufacturer roadside-assistance instructions available. Transport requirements can vary by model, drive configuration, wheel position, and the type of damage. A flatbed may be the manufacturer’s preferred method, but the manual and the responding provider should determine the actual procedure.
For general preparation before a long trip, see the Roadside Emergency Kit Checklist. If the vehicle must travel a substantial distance, the guidance in How to Prepare a Car for Long-Distance Towing or Vehicle Transport can help you document its condition and arrange the handoff.
Checklist by scenario
1. The EV has a depleted traction battery
- Confirm the vehicle is in a safe location and record the nearest address, road number, mile marker, or recognizable landmark.
- Tell the dispatcher that the vehicle is fully electric, plug-in hybrid, or another type of electrified vehicle. Do not assume the provider will identify the difference from the badge alone.
- Provide the make, model, model year if known, drive type if known, and whether the vehicle can select neutral or tow mode.
- Ask whether the provider offers mobile EV charging or whether the vehicle should be transported to a charging location.
- Ask what equipment will be used. Confirm whether a flatbed is available and whether the provider follows the vehicle manufacturer’s transport instructions.
- Keep the charging cable with the vehicle if it is needed at the destination, but do not connect or disconnect equipment in an unsafe location.
Mobile charging can be useful when the vehicle is otherwise undamaged and the provider has suitable equipment, but availability, connector compatibility, charging speed, and access conditions vary. A short charging session may only make it possible to reach a charger; it should not be treated as a guaranteed solution.
2. The vehicle will not start, but the traction battery is not empty
An EV can have energy in its main battery and still fail to unlock, enter drive, or power its systems because of a separate low-voltage battery or another fault. Tell the dispatcher exactly what the dashboard shows and whether the lights, locks, displays, and charging port operate. Do not assume a conventional jump start is appropriate. A provider should follow the model-specific procedure and use approved connection points and equipment.
3. A flat tire or damaged wheel is preventing movement
- State whether the vehicle has a spare tire, tire-repair kit, run-flat tires, or no spare.
- Describe the damage and whether the tire is completely off the rim, the wheel is bent, or the vehicle has underbody contact.
- Ask for a technician who can safely lift the vehicle without contacting battery enclosures or other vulnerable components.
- If a tire can be changed safely, confirm that the replacement tire matches the vehicle’s requirements before driving away.
- If the wheel or suspension is damaged, request transport rather than attempting to drive the vehicle.
A flat tire service may solve a simple puncture, but it is not a substitute for recovery after wheel, suspension, or underbody damage.
4. The EV is stuck in mud, snow, sand, or a driveway
Request a vehicle recovery service or winch-out and describe how far the vehicle is from a firm surface. Explain whether all four wheels are on the ground, whether the vehicle is resting on its battery tray, and whether recovery points are accessible. Do not allow a chain, hook, or strap to be attached to an unapproved location. The recovery operator should consult the vehicle’s manual and use the correct attachment points and loading method.
5. The EV has been in a collision
Call emergency services first when anyone may be injured or the roadway is dangerous. Tell the tow provider about airbag deployment, visible battery damage, smoke, heat, fluid, broken wheels, and whether the vehicle can roll. Request an accident-capable provider that can transport the vehicle without dragging damaged wheels or exposing the underbody to additional impact. Follow the vehicle manufacturer’s post-collision instructions and the destination facility’s intake requirements.
| Situation | Likely service to request | Key question |
|---|---|---|
| Depleted battery, vehicle otherwise undamaged | Mobile charging or flatbed transport | Can you support this vehicle’s connector and manufacturer procedure? |
| Vehicle will not power on | EV-trained roadside technician or flatbed | Do you handle the model’s low-voltage and tow-mode procedure? |
| Flat tire or wheel problem | Tire service or flatbed | Can you lift and secure the vehicle without contacting the battery? |
| Stuck off pavement | Winch-out or specialized recovery | What are the approved recovery points and ground conditions? |
| Collision or visible battery damage | Emergency recovery and controlled transport | Can you follow the manufacturer’s post-collision restrictions? |
What to double-check before the tow begins
Use this vehicle-information worksheet when calling EV towing:
- Make, model, model year, and license plate or vehicle identification number if readily available.
- Exact location, direction of travel, access restrictions, and the safest meeting point.
- Battery state shown on the dashboard, if the display works.
- Whether the vehicle rolls, steers, powers on, selects neutral, and can enter its designated tow or transport mode.
- Drive configuration if known, such as front-wheel drive, rear-wheel drive, or all-wheel drive.
- Current damage, especially to wheels, suspension, underside, charging port, or battery area.
- Destination address, business hours, and whether the destination accepts disabled EVs.
- Whether personal items, charging cables, key cards, or digital keys are inside the vehicle.
Before loading, ask the operator to confirm the loading method, tie-down points, wheel restraints, and destination. Take photos of the vehicle from all sides, including existing damage, if doing so is safe. Remove loose valuables and keep the key or access device available for the handoff. If the vehicle uses an app or digital key, tell the destination how access will be provided.
Confirm costs and coverage before authorizing non-emergency work. Roadside benefits, towing limits, after-hours terms, and destination restrictions depend on the policy or membership. The guide to insurance coverage and roadside assistance claims can help you identify the questions to ask. For an estimate framework, review the towing cost calculator, while recognizing that specialized equipment and recovery conditions may change the final quote.
Common mistakes
- Requesting a standard tow without identifying the vehicle as an EV. The dispatcher needs enough information to send suitable equipment and a provider familiar with the vehicle’s restrictions.
- Allowing a tow by the wrong wheels. Some EVs should not be dragged with driven wheels rolling. Follow the owner’s manual and the operator’s approved transport method.
- Assuming a jump start will charge the main battery. A low-voltage battery procedure and traction-battery charging are different tasks.
- Using a charging cable as a recovery tool. Cables are not tow straps, and charging equipment should not be used to move a vehicle.
- Dragging a collision-damaged EV. Damaged wheels, suspension, or battery areas can worsen during an improvised move.
- Ignoring the manual’s tow-mode instructions. If the vehicle cannot safely enter the required mode, tell the provider rather than forcing controls or attempting to drive it.
- Choosing only by the phrase “cheap towing near me.” The lowest initial quote may not include the flatbed, winch, destination, or specialized handling the vehicle needs. Compare the proposed equipment and total scope of service.
When to revisit this checklist
Review this guidance before a long road trip, before severe winter or summer travel, after buying a different EV, or whenever you change roadside-assistance coverage. Save your vehicle’s current owner’s manual, manufacturer roadside number, preferred charging-network details, and destination repair contacts in your phone. Check that your provider can handle your model and the conditions you are likely to encounter.
Revisit the checklist when the manufacturer changes transport or recovery instructions, when your charging connector or adapter setup changes, or when a local provider updates its equipment. Roadside services and mobile charging capabilities can vary by location, so verify them rather than relying on an old assumption.
For a final pre-trip action list, save the vehicle information worksheet, photograph the approved recovery points from the manual if practical, confirm your coverage, and identify at least one destination that can service the vehicle. If a breakdown happens, prioritize personal safety, accurately describe the EV and its condition, request the right equipment, and do not authorize movement that conflicts with the manufacturer’s instructions.